Name: Acrylic Keyrings (Custom Shape)
Brand: Betterway Systems Co., Ltd

Design Guideline

If you will be designing artwork for this product, please read through the guideline as our PDF requirements are quite specific. This guide will walk you through the document setup instructions and also the PDF Export process. We recommend reading through our User Guide for any further information.

Margin : 2mm on all sides (image)

Margin : 2mm on all sides (in white)

Whitish edges can be visible after cutting

Image Resolution Guide

When using imagery in any design for print, resolution is one of the most important factors to enable a high quality print output. Refer to our User Guide for more information.

Image with a resolution of 300dpi
Image which was originally 72dpi and upscaled to 300dpi using Photoshop
Image which was originally 72dpi and printed at 72dpi

Adobe Illustrator Guide

Create your document size as per the template instruction. This document size is also the Trim Size. Enter the amount of artboards to suit the product you are designing for. 1 Artboard is the same as one sided printing. 2 Artboards are double sided etc.

Here you will need to enter the documents Bleed setting. For a business card, this is 2mm Bleed. Please refer to the product guideline you are designing for, as bleed values can vary.

Select CMYK for the colour mode and Raster Effects High (300ppi).

Acrylic Keyrings (Custom Shape) Tips

Printed Product
The picture on the left shows the colour difference after front and back printing
Despite being printed with a layer of white ink, there may be some ‘show-through’ of the opposite image. This is unavoidable.
Colour saturation differ each time with white and colour inks.

Printed Detail
*Bending -There might be slight bend on the printed surface due to pressure during printing. *White Color Shift -Please be noticed that there might be 0.3 mm shift during white ink printing.

Cutting Line
*Visible Cut Point -There might be visible cut point on the edge of the product.

Ink Falling Off
The ink is likely to fall off when laser cutting is performed over the printed surface.
The ink is sensitive to heat and cracks off when in contact with the laser.
To ensure this doesn’t happen to your project, create your print file at least 2mm inward from the cutting line.

Data Creation
-Ensure to create text on printing layer in a reversed manner to be reflected correctly from the opposite side. -Acrylic will be produced with back printing method. Printing 1 + White Ink + Printing -White Data : Create data using K=100 (Black) Select path in illustrator to create lines

Keyring Hole
-Ensure to create keyring hole in size 3mm with cutting line at least 2mm thick 1. Cutting Size: Including keyring hole 2. Cutting line must be created using vector line via illustrator

White Printing

White ink printing is used when printing onto non-white paper/material. Examples may include printing onto coloured paper or transparent vinyl. White priting can also be used to add a backing layer to help images retain vibrancy when printing onto a transparent sheet. See the example below of printing without white ink and with white ink.

Non-White Printing

Image printed without a white ink layer

White Printing

Image printed with a white ink layer

As you can see from these examples, the white layer of ink allows the colours of the design to appear more vivid and blocks any light coming through from the back. In the case of printing onto coloured paper we can print only white or a combination of a white base layer and then an additional full colour print on top of this. Here below is an exmaple of white printing onto coloured paper, full colour printing onto coloured paper with the white base layer, and full colour printing onto coloured paper (without the white base layer).

Printed with white layer only
onto coloured card.

Printed with white layer and colour layer
onto coloured card.

Printed with colour layer only
onto coloured card.

We strongly recommend to use a white base layer when printing colour onto coloured paper. Choose the printing method which best suits your design/project. If you are unsure don’t hesitate to reach out to our support team who can talk you through the best solutions to best suit your requirements.

Creating Your File To Print White Ink

White ink can only be printed if you make a ‘White’ Layer in your artwork, using Adobe Illustrator or Indesign only. To do this; create a new layer in Illustrator or Indesign and name it ‘White’. In this layer, use a 100% Black stroke/fill colour to create your design. Everything in black will be printed in white ink. We know this may sound confusing to use a black colour for white printing, but it’s the simplest way for our printing machines to determine which areas require white ink.

Remember to extend any white printing beyond the outside of the bleed line if you want your design to run off the sheet.

Below this white layer, you can place any other special layers, (eg. Creasing, Scodix, Lasercut, Foil Emboss, etc.). Place your ‘Printing’ layer below any special layers. In this ‘Printing’ layer, you can place all text and images that will be printed in full-colour ink.

When your design is ready to be exported to PDF, It is essential to export using the below settings.

Cutting Guideline

Cutting refers to the sheet being cut along a set path. For this example, we will create the artwork for a dog-shaped poster. To do this; create a new layer in Illustrator or Indesign and name it ‘Cut’. In this layer, use a 100% Magenta stroke colour to create an outline where you intend to cut the sheet. A blade will cut out the shape you create via an auto cutting plotter machine. If your design is heavily intricate, a cutting problem may occur. For this reason, we suggest you keep your design simple to get the best result. Below this Cut layer, you can place any other special layers, (eg. Creasing, Scodix, Lasercut, White printing, etc.). Place your ‘Printing’ layer below any special layers, and here you can place all text and images that will be printed in full-colour ink. When your design is ready to be exported to PDF, It is essential to export using the below settings.

Exporting PDF’s

Adobe PDF Preset : Press Quality

Compatibility: Acrobat 6 (PDF 1.5)

Preserve Illustrator Editing Capabilities

Create Acrobat Layers from Top-Level Layers

Enter ‘Marks and Bleeds’ Section last

Use Document Bleed Settings

Save PDF

Returns & Exchange

Here at Red Printing, we make every effort to ensure excellent customer satisfaction. We pride ourselves on our high-quality print production, but sometimes - as with all printing, a manufacturing issue can arise.

Please note that we are not responsible for individual circumstances which are beyond our control, but not limited to, the following:

Consumer-made mistakes such as:

Font mis-selection, typo, grammar and spelling errors
Poor/low quality and low-resolution uploaded images
Design errors and wrong colour selections
Any errors made by you during the creation of an artwork file, mis-selection of size, quantity, product type, finishing options, paper type, cutting options and other order specifications
Wrong template selection, incorrect image orientation and positioning
Duplicate orders
Incorrect file layout for finishing such as folding, creasing, die or kiss cutting
Delivery delays due to erroneous files and damage to products after delivery to the customer

Please note that we do not proof artwork or designs created by customers before production, and it's the customer's responsibility to check the print file thoroughly before sending to print. Please preview your designs, check and correct any mistakes before placing your order and payment. Red Printing reserve the right to decide whether to issue a refund, replacement or partial refund on a case-by-case basis.

If a refund request is made and approved, through credit card, it would reflect in your next bank statement (depending on banks) or if through PayPal, you should receive the funds back to you within approx. 5-7 business days.

Just to further inform you on colour printing, even though we ask that you edit your files in CMYK, colours are still displayed on the screen using RGB and will always look brighter and more vibrant than the final output. Because of this, the colours on the printed products may differ slightly than seen on your monitor screen. Please refer to our User Guide for more information.

For further inquiries or to make a reprint/refund request, please email us at support@redprinting.sg and we will look into it.

Order Total	Digital Print (Labels & Stickers, Business Cards, Marketing Materials, Cards & Gifts, and Photo Prints)	Banners and Signs
SGD 0.00 - SGD 49.99	Shipping: SGD 5.90	Shipping: SGD 5.90
Over SGD 50.00	Free Shipping	Free Shipping
Delivery Time: 7-9 business days

Acrylic Keyrings (Custom Shape)

Printing Quotation

Before We Print

Acrylic Keyrings (Custom Shape)

Product Features

Design Guideline

Design Guideline

Image Resolution Guide

Acrylic Keyrings (Custom Shape) Tips

White Printing

Non-White Printing

White Printing

Creating Your File To Print White Ink

Cutting Guideline

Finishing Info

Heart Chain

Heart Chain2

C-Hook Chain

Star Chain

Crescent Chain

Lobster Clasp Chain

Kitty Chain

Ball Chain

Carabiner

Returns & Exchange